Maintenance

Training Course: Pumps, Compressors and Turbines: Selection, Operation & Maintenance


Register Now
Quick Inquiry
Discount Group Download Brochure (37)

MI6046

9 - 13 Feb 2025

Istanbul (Turkey)

Hotel : DoubleTree by Hilton Istanbul Esentepe

Cost : 5775 € Euro

Introduction

Fluids and fluid movers such as pumps, compressors of various designs and applications, are encountered throughout chemical and process industries, including oil refineries, gas production facilities, power generation, and other fields of engineering. As fluids can be in-process material in the form of liquid, gas, or a mixture of both with solids, corresponding pumps and compressors sometimes have to satisfy high demands of efficient transport of complex and difficult fluids. The progress in the design and application of pumps, compressors, and turbines has been so rapid that currently, all limitations of pressure, capacity, temperature, and nature of fluids have disappeared. At the same time, this advance in construction and application has presented numerous problems: mechanical, hydraulic, operating, economic, etc.

A thorough understanding of basic principles of fluid flow in pumps, compressors, and turbines as well as in piping systems is a prerequisite for the successful design, installation, and operation of these machines. Various numerical examples are selected carefully to be from real-life technical practice and will help remove any misconception reflected in an inefficiently operating piping system. Design and operation of gas turbines due to their complexity, require special attention and information on their interaction with axial compressors.

Highlights of the course include:

  • Principles of selection of the right pump, compressor, and turbine for the given application

  • Practical issues related to trouble-free functioning of pumps, compressors, and turbines in various industrial applications

  • A good blend of comprehensive explanations of fundamental principles of fluid flow and valuable empirical industrial experience gained over the years in operation and service

  • Guidelines for installation, operation, and maintenance with the procedure to diagnose and solve problems in operation with troublesome fluids

  • Economical issues: cost and benefit analysis

Course Objectives 

This course will enable the participants to achieve the following:

  • Understanding of technical features of different types of pumps, compressors and turbines, and their capabilities and limitations

  • Familiarity with principles of the hydraulic and mechanical design of pumps, compressors, and turbines according to existing world standards and codes

  • Knowledge on the selection of optimal type and size for a given industrial application

  • Proper use of methods of diagnosing and estimating the degree of deterioration and inefficiency of pumps, compressors and turbines and the ways to improve them

  • Best practices and techniques of pinpointing the problems, and choosing the most efficient remedies, in operation, such as cavitation, surge, stall, choking, corrosion, erosion, etc

Course Process 

The course will combine lectures with active delegate participation including discussions and workshops. Although numerical examples and calculations will be included, the focus will be on physical principles and clear technical reasoning. Workshops are scheduled where case studies about pumps, compressors, and turbines will be presented with calculation procedures and results discussed

Course Benefits 

This course will benefit the delegates through:

  • Stronger familiarity with all types of pumps, compressors, and turbines that are encountered in every-day industrial practice in the process and chemical industry

  • Enhanced knowledge of methods used to assess the main design parameters of pumps, compressors, and turbines

  • Greater understanding of the guidelines for selection and sizing of pumps, compressors and turbines regarding their operational cost in terms of energy consumption

  • Knowledge of modern trends in the pumps, compressors and turbines industry regarding increasing demands for greater efficiency and reduction in size when dealing with difficult fluids (viscous, corrosive, abrasive, toxic, explosive, etc.)

  • Confidence in the best practices for their efficient operation, maintenance, and troubleshooting the problems related to cavitation, surge, stall, choking etc.

Course Results 

The course will benefit the company through:

  • Performance of the company in the long run will be improved by an adequate selection and sizing of pumps, compressors, and turbines that have the best overall efficiency

  • Well maintained pumps, compressors, and turbines will prolong the life of the plant and significantly reduce overall costs, and in the same time reduce the risks and impact on the environmental

  • Efficiently operated pumps, compressors and turbines by skilled personnel will result in energy saving and in the reduction of overall costs of the plant operation

  • Personnel in the maintenance department will be able to follow the best practices for inspection, maintenance, repair and alteration

  • Problem-free operation of pumps, compressors, and turbines will result in reducing of downtime for repairs and alterations and reduce the operating costs in the technological process.

Course Outlines 

Day One

Centrifugal Pumps

  • Overview of various types of pumps based on design and application

  • World standards and codes related to pump design

  • Main elements of centrifugal pump construction

  • Design of pump-suction piping

  • Selection and sizing of centrifugal pump

  • Solving problems in the operation

Day Two

Positive Displacement Pumps

  • Positive displacement pumps: reciprocating and rotary

  • Pump requirements for chemical, process and oil industry, power generation

  • Pumps for special applications

  • Guidelines for pump installation and operation

  • Pump inspection, control, and performance testing

  • Maintenance and troubleshooting of pumps

Day Three

Centrifugal Compressors

  • Overview of the main features of various types of compressors

  • Classification of compressors based on design and application

  • World standards and codes related to compressor design

  • Main elements of centrifugal compressor construction

  • Analysis of centrifugal compressor efficiency

  • Guidelines for trouble-free centrifugal compressor operation

Day Four

Positive Displacement Compressors

  • Positive displacement compressors: Reciprocating and Rotary
  • Basic criteria for selecting the optimum cost-effective compressor

  • Compressor loadings and speeds; noise control and protection

  • Compressors for special applications

  • Guidelines for compressor installation and operation

  • Compressor inspection, maintenance, control, performance testing, and troubleshooting

Day Five

Industrial Gas Turbines

  • Overview and classification of gas turbines

  • World standards and codes related to gas turbine design

  • Main elements and technical characteristics of gas turbine design

  • Radial and Axial-flow gas turbines

  • Combustor performance - types of fuels, combustion and pollution control

  • Gas turbine deterioration - corrosion and erosion prevention

  • Mechanical vibrations - monitoring, measurements, diagnostics and analysis

  • Installation , operation, maintenance and troubleshooting of gas turbines

Maintenance

Training Course: Pumps, Compressors and Turbines: Selection, Operation & Maintenance


Register Now
Quick Inquiry
Discount Group Download Brochure (37)

MI6046

9 - 13 Feb 2025

Istanbul (Turkey) - DoubleTree by Hilton Istanbul Esentepe

Hotel : DoubleTree by Hilton Istanbul Esentepe

Cost: 5775 € Euro


  About Istanbul

Few places compare to the vibrant, cosmopolitan city of Istanbul, whose enormous size straddles both Europe and Asia, forming a bridge between western and eastern cultures. Resting upon the natural harbor of the Golden Horn, the skyline of the once-Constantinople is pierced with minarets and ancient monuments that embody centuries of history. While it is brimming with historical landmarks and colorful markets, modern Istanbul is also well represented through its contemporary art scene, European-style café culture, world-class dining venues.


  Things to do and places to visit in Istanbul

Istanbul is teeming with attractions and landmarks from historic sights and unique cuisine to lively markets and unmistakable culture. It is a thriving city, with a myriad of things to do that skillfully manage to blend every aspect of both the contemporary and the historical world.

On a city break in Istanbul be sure to:

  • Visit a hammam, a traditional Turkish bath, whose origins date back to Roman times.
  • Marvel at the Hagia Sophia, Süleymaniye Mosque and Blue Mosque, Istanbul's most spectacular monuments that dominate the skyline.
  • Explore the Topkapi Palace Museum, one of Istanbul's most visited museums, home to over 80,000 artifacts.
  • Walk through the Basilica Cistern, an underground marvel built in the 4th century.
  • Be dazzled by the Grand Bazaar, one of the world's oldest and largest covered markets.
  • Go shopping for exotic products and Turkish delights in the Spice Bazaar.
  • Cross the bridge connecting Europe and Asia against the backdrop of the Bosphorus, or take a Bosphorus cruise.
  • Taste the diversity and flavor of Turkish cuisine.
  • Admire panoramas of the city from the Galata Tower.
  • Walk through Taksim Square, the city's dynamic square that never sleeps.
 22 Portman Square, Marylebone, London W1H 7BG, UK
 3 Oudai street, Aldouki, Giza, Giza Governorate, Egypt
 0020233379764
 00201095004484
 00201102960555
 00201102960666
 19 Mayıs Mahallesi, 19 Mayis Street No 2 Sisli, 34360 Istanbul/Turkey
 00905357839460
 Australia Street, Raouche Beirut, Lebanon .، Beirut, Lebanon
 0096181746278
 811 Massachusetts Avenue, Boston, Massachusetts, 02118, USA
 6 Beirut Street - Fifth Circle Abdoun, P.O. Box 831370, 11183 Amman, Jordan
Copyright Global Horizon Training Center © 2019