Introduction
This course provides a broad experiential introduction to maritime skills.
Candidates will explore a variety and range of knowledge enhancement of people working in the maritime sector.
There's an introduction to marine navigation, where candidates learn how to use a marine chart to plot position using standard marine instruments, and how to take account of the weather.
The safety aspects of any job in the maritime sector are tackled in the Unit Health and Safety in the Maritime Sector, including safe working practices on board a ship, life-saving principles, basic first aid, and basic fire safety. The Unit also covers the basic engineering involved with small boats, such as pumping and steering mechanisms reviewed and the routine care and maintenance of the engine and auxiliaries on a boat.
Training Objectives
At the end of this training program participants will learn:
- The basics of navigation.
- Navigation branches.
- What are the direction measurements instruments, and speed measurements?
- What are the depth measurement devices and their types and scope of work?
- What are the electronic instruments that are used in navigation?
- Plotting and positioning using different techniques.
- Comprehend the health and safety measurements in ship operations.
- The safe working practices on board the vessels
- Basic Engineering and General Engineering Knowledge
- Shipboard Equipment and Systems and Propulsion
Methodologies
Central to the Course is developing the competencies valued by employers in general and necessary for effective work in the maritime sector. These skills are embedded in the different Units, providing candidates with the opportunity to practice and develop these skills through practical and team-working activities in real or simulated working environments and investigations throughout the Course. Candidates will also evaluate their own skills, seeking feedback from others, identifying areas of improvement, taking account of feedback received, and reviewing their progress throughout the Course.
Course outlines
Module 1: Navigation for Non-Navigators
Day 1
Introduction to Navigation
- The shape of the earth.
- Poles
- Equator
- Parallel of latitude
- Meridians
- Latitude and Longitude
- D’Lat and D’Long
- Distance
- Units of Measurements
- Geographical Mile
- Nautical Mile
- Knots
Branches of Navigation
- Deck Reckoning
- Piloting
- Electronic Nav
- Celestial Navigation
Direction Measuring Instruments
- Compass
- Magnetic Compass
- Gyro Compass
- Gyro Compass Repeaters
- Bearing Circles
- Azimuth Circles
- Pelorous (Dumb Compass)
- Alidade
Speed Measuring Instruments
- Taffrail Log
- Pito-static Log
- Engine revolution Counter
- Short Range Measuring Devices
Day 2
Depth Measuring Device
- Head Lead
- Deep Sea Lead
- Sounding Machine
- Echo Machine (FATHOMETER)
Electronic Instruments
- Radio Receiver
- Radio Direction Finder (RDF)
- Radio Detection and Ranging (RADAR)
Navigation
- Coastal Navigation (Terrestrial Navigation)
- Celestial Navigation (Astronomical Navigation)
- Radio Navigation
- Satellite Navigation
Plotting and Positioning
Module 2: Maritime Technical knowledge for GMs and CEOs
Day 3
Safe working practices on board a ship
Main Engines & propulsion System
- Ship Systems
- Prime and/or Secondary Propulsion Units/Movers
- Damping
- Flexible Couplings
- Gearboxes
- Shafting
- Propeller
- Diesel Engines
- Diesel-Electric
- Turbines
Day 4
Power Generation and Distribution
Auxiliary Machineries and Systems
- Pipes, Fitting, and Valves Separator
- Pumps Types
- Fans and Blowers
- Heat Exchangers and Compressed Air
- Starting Systems
- Anchor Windlasses
- Rudder Systems and Machinery
- Fire extinguishers and fighting systems
- Inert gas systems
- Evaporators and distilling plants
- Refrigeration rooms
- Air conditioning principles.
Day 5
Deck Equipment and Machinery
- Deck Crane/Cargo Rail Crane
- Hydraulics Systems
- Launch and recovery systems
- Rig anchor
- Mooring Winch
- Stabilizers
- Steering Gear SR/RV
Fuel, Lube Oil, Freshwater, and Sea Water Systems
Sewage Treatment Plant, Black, and Gray Water Systems
About Amsterdam
Amsterdam, capital of the Netherlands, is a popular destination amongst travelers from all around the world. Once just a little fishing village, Amsterdam is now a major international city after having become an important port during the 1600s. Throughout its history, the city has had many famous residents, including artists, philosophers and other historical figures. There is much to discover along Amsterdam's quaint streets and picturesque canals. So much so that a flight to Amsterdam comes with a guarantee of cultural and historical attractions that will provide memories to last a lifetime. Amsterdam is a hotbed of culture for travelers of all ages and tastes.
Things to do and places to visit in Amsterdam
From the moment passengers step off their flight to Amsterdam, they will find it a friendly city with a lively atmosphere. Its flat geography means that it is perfect for exploring by bicycle. If you're feeling less active, it the city is also well-served by public transport. The so-called Venice of the North has something for every visitor. Culture vultures have museums, galleries and theaters to see, Families can visit the zoo or the Science Center NEMO.
When visiting Amsterdam, be sure to:
- See the picture-perfect and colorful houses of the Grachtengordel district.
- See the iconic works of one of Holland's most famous artists at the Van Gogh Museum.
- Visit the house where Anne Frank and her family hid from the Nazis.
- Browse through the extensive collection of fantastic art in the Rijksmusem.
- Wander through the blaze of colors that is the Singel Flower Market.
- See the city at a leisurely pace on a canal cruise.
- Marvel at one of the city's many historic churches.
- Learn about life aboard a ship at the National Maritime Museum.
- Discover the Begijnhof's well-preserved medieval architecture.
- See animals of all kinds, as well as the butterfly pavilion and aquarium, at the Artis Zoo.