Conference: Fundamentals of Mechanical Technology

CO8048 10 - 14 Jul 2022 Cost : 2275 € Euro
Register Inquiry Choose Date

Introduction

Mechanical engineering is at the center of the chemical, oil, gas, and petrochemical industries. It requires familiarity not only with sound engineering principles but also with other engineering techniques including inspection, monitoring, and condition evaluation. The mechanical engineer is interested in safe containment and movement of solids, liquids, and gases. Of specific importance are material properties, design, static & rotating equipment design, inspection, and repair as well as an understanding of maintenance strategies and condition monitoring.

Conference Objectives of Fundamentals of Mechanical Technology

This seminar focuses on the central areas of mechanical engineering and guides the delegates in developing both fundamental and practical understandings of key issues. Workshop examples will be drawn from the oil and gas mechanical equipment.

Conference Process of Fundamentals of Mechanical Technology

The course combines sound engineering principles, methods, and applicable codes & standards and best industry practices. Actual major incidents as well as industry experience will be reviewed in depth to reinforce every topic.

Conference Benefits of Fundamentals of Mechanical Technology

Upon completion of this workshop, the delegates will develop both fundamental and practical understanding of central issues in mechanical engineering as applied in the petrochemical and allied industries.

Conference Results of Fundamentals of Mechanical Technology

The seminar provides a practical introduction to the fundamentals of mechanical engineering thereby developing perspective and focus from a company viewpoint.

Core Competencies of Fundamentals of Mechanical Technology

Delegates will enhance their competencies in the following areas:

  • Mechanical design of pressure equipment and piping systems in compliance with applicable codes, standards, and regulations.
  • Engineering materials properties and selection criteria for specific applications.
  • Identification and assessment of active degradation mechanisms and the failures they may cause.
  • An understanding of the various static and rotating equipment used in the petrochemical environment.
  • Application of maintenance strategies and philosophies.
  • Condition monitoring, inspections and assessments.

Conference Outlines of Fundamentals of Mechanical Technology

Day 1: Introduction & Fundamentals

  • Engineering Material Properties
    • Stress and Strain
    • Fracture failure, Modes, Stress concentration, Fracture toughness
    • Fatigue failure, testing and mechanism
    • Temperature Considerations and Creep Failure
    • Identification of Damage Mechanisms
  • Mechanical Design
  • ASME & API
  • Codes & Standards
  • Design for static strength

Day 2: Materials Selection and Inspection

  • Materials Selection
    • Materials of Construction
    • Carbon Steels
    • Alloy Steels
    • Stainless Steels
    • Nickel Based and Titanium Alloys
  • Inspection techniques
  • Visual
  • Penetrant
  • Magnetic Flux
  • Eddy Current Inspections
  • X-Ray & Gamma ray
  • Ultrasonics – TOFD & Pulse-Echo

Day 3: Valves, Piping & Fitness for Service

  • Valves
    • Valve Types
    • Valve Characteristics
    • Valve Applications
    • Valve Selection
    • Valve Actuators
  • Piping & Pipelines
  • ASME B31
  • Pipe Types, construction and Schedules
  • Steel Pipes
  • Welded Types and Sections
  • Flanges and Gaskets
  • Plastic Pipes, Composite Pipes
  • Pipe Coatings and Linings
  • Pipe Supports and insulation blocks
  • Stress relief in Piping Design
  • Pigging
  • Water hammer
  • Overview of API 570 - Inspection & repair of Pipelines & Piping
  • API 579 overview
  • Fitness for Service

Day 4: Corrosion

  • Corrosion Fundamentals
  • Types of Corrosion
  • Corrosion Inspection and Monitoring
  • Corrosion Minimization
  • Coatings
  • Inhibitors
  • Cathodic Protection

Day 5: Compressors

  • Types of Compressors – Reciprocating, Centrifugal and Screw
  • Blading and Staging
  • Performance Curves
  • Compressed Air Usage and instruments
  • Glands and Mechanical Seals

Mechanical Maintenance

  • Strategies & Philosophies
    • Maintenance system optimisation
    • Maintenance Management Systems
  • Condition Monitoring
  • Vibration Analysis
  • Shaft Alignment
  • Practical Examples
 22 Portman Square, Marylebone, London W1H 7BG, UK
 3 Oudai street, Aldouki, Giza, Giza Governorate, Egypt
 0020233379764
 00201095004484
 00201102960555
 00201102960666
 19 Mayıs Mahallesi, 19 Mayis Street No 2 Sisli, 34360 Istanbul/Turkey
 00905357839460
 Australia Street, Raouche Beirut, Lebanon .، Beirut, Lebanon
 0096181746278
 811 Massachusetts Avenue, Boston, Massachusetts, 02118, USA
 6 Beirut Street - Fifth Circle Abdoun, P.O. Box 831370, 11183 Amman, Jordan
Copyright Global Horizon Training Center © 2019